In the decoration of the whole family, tile laying is a very important construction project, so it is particularly important to find a good tile worker. The craftsmanship of tile workers not only affects the final decoration effect, but also may affect the safety after occupancy.
How to know the level of tile workers?
①Wall treatment - wall leveling and base treatment
Experienced bricklayers often use roughing treatment when laying tiles on the wall, because roughing treatment can effectively increase the firmness of ceramic tile bonding; in terms of increasing the firm strength of ceramic tile bonding, the commonly used construction methods are roughing and roughing treatment. At the same time, using roughing, it is likely to cause the problem of delamination of the leveling layer.
②Wet the wall with water
Experienced bricklayers will spray water on the wall to wet it, because the dry wall will absorb the water in the cement mortar during the bonding process of the bonding mortar on the back of the brick with the wall, which will easily lead to two problems:
① The cement mortar is not firmly bonded to the wall to form delamination;
② As a result, the setting effect of ceramic tile cement mortar is reduced, and the moisture contained in the cement mortar on the back of the brick is absorbed by the dry wall base, which shortens the natural setting cycle of the cement mortar, reduces the bonding effect of the cement mortar on the back of the brick, and thus affects the bonding degree of the ceramic tile.
③Wall tiles are not paved by single-sided capping
In the process of wall paving, the cement mortar shall be fully paved on the back of the wall brick, and one wall shall not be paved to the top at a time to prevent collapse.
④Pointing treatment during tiling
Experienced bricklayers will do pointing treatment when paving tiles, that is, immediately before the tiles are dried and fixed.
⑤Finished product protection will be done before paving
Experienced bricklayers will do finished product protection before tiling. In the construction of ceramic tiles, finished product protection involves not only the transformation of water and electricity, but also waterproof and doors and windows, etc. finished product protection needs to run through the whole process. No matter the owner or our construction units, they should strengthen the awareness of finished product protection to achieve finished product protection.
