Mistakes in tile maintenance 1: random waxing
Due to lack of professional knowledge, many owners mistakenly think that waxing can better protect ceramic tiles, but they inadvertently make a mistake in tile maintenance. Because not all tiles need to be waxed. Especially for the vitrified brick, when it is found that the surface of the vitrified brick with a long time of use turns yellow and has stains, it is necessary to immediately re wax it without removing the original wax, which will make the vitrified brick with a new wax lose its luster. Therefore, in our daily cleaning and protection of vitrified bricks, we should first clean all the stains on the floor tiles thoroughly. If there is glue or sticky dirt, we can use neutral detergent and cleaning cloth to wipe. In order to re wax the vitrified brick, it is necessary to sprinkle the wax remover without water on the surface, wait for about 15 minutes, and then wet the ground with water to remove the old wax. After cleaning, then follow the normal waxing steps for maintenance.
Mistakes in tile maintenance 2: opening windows to speed up air drying
We often see on the website of a lot of decoration experience that after the wall tiles are paved, windows should be opened to speed up the air drying. However, it is ignored that the tiles should also pay attention to lock the moisture. When tiling is dry, not only moisture, but also more importantly, moisture must be locked to ensure that moisture does not run off.
Misunderstanding of tile maintenance 3: cleaning tile stains with strong acid
When there are stains on the surface of the tiles, many people will choose to use strong acid to clean the stains, so that the tiles are corroded and lose luster, sometimes the stains are still inside the tiles. Sometimes with acid to clean the stains, but soon will be dirty, tiles are more prone to infiltration. Although it is a quick and effective method to remove the stains with acid, it is not necessary to use it on the seeping tiles, especially the vitrified polished tiles or under the guidance of professional tile care and cleaning service personnel, otherwise it is easy to damage the luster of the tiles. If the tile is dirty, first determine what kind of stain it is. If it is cement or other stains on the surface, it can be removed with weak acid. If it is the stain that seeps into the micro pore inside the ceramic tile, you can choose a professional cleaner. It is important not to damage the glossiness of the polished brick, and make a high-quality anti fouling treatment immediately after cleaning the seeping dirt to prevent the seeping dirt on the brick surface.
