How to clean and brighten floor tiles: treatment of different stains
1. The daily cleaning of ceramic tiles can be carried out with detergent, soap, etc.
2. Use soap and a little ammonia water and turpentine mixture to clean the tiles to make them more shiny.
3. The polished brick should be waxed regularly, and the time interval should be 2-3 months.
4. If there is a scratch on the brick surface, the toothpaste can be applied on the scratch, and it can be repaired by wiping with a dry cloth.
5. The joint between the brick and the brick can be removed with decontamination cream from time to time, and then a layer of waterproof agent can be brushed on the joint to prevent the growth of mold.
6. If there are tea stains, coffee, beer, ice cream, grease and other pollutants on the brick surface that are difficult to clean, sodium hydroxide or potassium bicarbonate solution can be used for cleaning.
7. For ink, cement and other pollutants, the effect of cleaning with hydrochloric acid, nitric acid and other dilute solutions is better.
8. If there are paint, paint and other pollutants on the floor tile, special cleaner can be used for cleaning.
9. Rust can be removed by washing with 2% oxalic acid solution and then wiping with clean water; or grind 3-4 vitamin C tablets into powder and sprinkle it on the floor tile surface, then scrub with water for several times, or remove rust stains. In case of rust and aging, 10% oxalic acid and citric acid can be used to wet the rusty part with water mixture, and then wipe it with concentrated brine again. If you have fresh lemon, you can squeeze out its juice and rub it on the rust stain by hand. Repeat several times until the rust stain is removed, and then wash it with soap water.
10. All kinds of gums can be removed with banana water. Pure banana water is a colorless, transparent and volatile liquid with strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as solvent and diluent for painting.
How to clean and brighten the floor tiles: Tips for daily cleaning
1. How to clean the floor tiles? First of all, we should prepare cleaning tools, mainly sponge mop, spray kettle and detergent corresponding to the stains on the floor tiles.
2. Before mopping the floor, fill the watering can with water, and spray a small layer on the floor tile evenly. Don't spray too much. After watering, wash the sponge mop, squeeze out the water in the mop head, and then mop the floor tiles with water. Because the ground is sprinkled with water, it's very energy-saving to drag it up, and it's very fast, because the water has been soaked on the floor for a while, and the dirt on the ground becomes easy to drag off.
3. For those with special stains, spray some special cleaners and leave for five minutes. Then use a slightly rough gauze (towel) or brush to scrub the stains. As for the choice of cleaning solvent, it depends on the type of stains on the brick surface. You can choose according to the above situation.
4. Clean the stains. After the whole mop is finished, the mop will be dirty. At this time, wash the dirty things on the mop head and squeeze them out. Here's also a tip for you. If you have a washboard at home, you can put it in a large basin and put water on it. It's best to soak the mop head. Then you can put the mop head directly in it and rub it back on the washboard. The sponge mop head will be clean soon, which is convenient and convenient.
5. Finally, squeeze out the water from the cleaned sponge mop, and walk on the ground once more quickly, which will absorb the excess water on the ground, and clean the place that was not dragged clean for the first time, and the effect will be very good!
