There are two kinds of floor tile paving, dry soft bottom paving method and wet soft bottom paving method. Dry soft bottom paving method is mostly used in living room and bedroom space, while soft paving method is used in bathroom and kitchen, and it is similar to wall paving method. Today's window home furnishing brief introduces the details of dry soft bottom paving method.
① Ground treatment:
Before laying the floor tiles, the ground treatment is required, and the level measurement must be completed. In this way, the slope of the ground can be understood, and the paving effect can be better controlled. Then determine the number of tiles to be used for each row and column according to the floor area and tile size.
② Laying cement mortar:
After the completion of ground treatment, a layer of mortar shall be paved on the ground. The ratio of mortar and water is 3:1, forming a semi dry layer. The surface shall be filled with shovel and plastering knife, and the thickness of mortar is generally 3-4cm.
③ Evenly spread:
After plastering the mortar, use the 1:1 cement mortar diluted to the back of the floor tile, and then evenly pave and paste it on the ground with mortar laid in advance. After confirming that the floor tile is evenly paved, the next operation can be carried out.
ant to be the eye of decoration supervisor? The tiling guide introduced below tells you the details that need to be paid attention to before, during and after tiling.
① Check the arrival of tiles when purchasing materials:
Whether you choose full package decoration, half package decoration or clear package decoration, when the tiles are delivered, the householder must be present for acceptance, and check the model, pattern, color and quantity of the tiles.
② Before decoration, the priming shall be smooth:
Before tiling, it is necessary to make sure that the wall surface and the ground are flat. The householder can check the flatness of the wall surface and the ground by himself with a horizontal ruler. In addition, the verticality of the wall corner is also the detail of inspection.
③ The setting out in decoration shall be accurate:
Setting out is the key during construction. If the householder supervises the workers on site, it is necessary to see whether the setting out of the decorator is accurate and whether there is obvious inclination. The line between the floor and the wall must also be aligned to prevent the uneven situation after tiling.
