n addition to paying attention to the quality and installation of the ground material, the owner should first carry out a process of ground leveling at home. This seemingly simple process will affect the laying effect. Today we will talk about the importance of ground leveling
1. Meaning of ground leveling
Before installation, it is necessary to pave the leveling layer on the ground according to the size of the room, the materials and the installation method. Only the ground leveling layer is found can pave, otherwise the construction difficulty will be increased and the quality of the ground paving will be poor
2. Judge whether the ground should be leveled
After understanding the specific meaning of the ground leveling, we do not immediately carry out the ground leveling, but to judge whether to carry out the ground leveling work, because not all rooms need to carry out the ground leveling work, for example, when there are pipelines on the ground, there is no height difference in the leveling layer, There is no need for leveling. The specific method to determine whether the ground needs to be leveled is to use a two meter guiding rule for carpet type measurement. Even in the same position, at least one cross direction measurement should be carried out. If there is a gap of about 3 mm or 5 mm in the lower direction of the assessment, it has exceeded the requirements of decoration and paving, It means that the ground has been uneven. At this time, the ground leveling layer is needed
3. Ignore the consequences of ground leveling
The ground leveling work is an important prerequisite process to ensure the installation and use effect, so it must be installed after the ground is found, but many residents ignore the ground leveling procedure, regardless of the consequences of the installation, which may lead to air noise in the use process; the buckle is damaged, the corner of the wall is covered with ash; the shaking occurs when trampling, which will cause inconvenience in life in the future, However, demolition and reassembly will cost a lot of money, which will cause great loss both in economy and time. Therefore, ground leveling must be done well before
