1, Notes after tiling
1. After paving for 1 hour, remember to wipe the cement, joint sealer or other dirty objects left on the brick surface in time, because it is difficult to clean after the joint sealer adheres for 4 hours.
2. After paving for 12 hours, the brick surface shall be knocked for inspection, and if there is empty drum sound, it shall be laid again.
3. After laying for 24 hours, walk, scrub thoroughly, mix the cleaner with clear water, and clean the tiles thoroughly.
4. When tiling is dry, not only moisture, but also more importantly, moisture must be locked to ensure that moisture does not run off. After tiling, it's better to sprinkle some water on the already paved tiles every day, but do not splash water. It is best to keep the ground moist for 4-6 days.
2, Tips for daily cleaning of ceramic tiles
Note: high quality ceramic tiles can be cleaned with cloth and water, and try to use less or no other chemicals.
1. The daily cleaning of ceramic tile can choose detergent, soap, etc.
2. With soap and a little ammonia water and turpentine mixture, cleaning tiles can make tiles more shiny.
3. If there is a scratch on the brick surface, the toothpaste can be applied on the scratch, and it can be repaired by wiping with a dry cloth.
4. The gap between the brick and the brick can be removed from time to time with decontamination cream, and then a layer of waterproof agent can be brushed on the gap to prevent the growth of mold.
5. For tea, coffee, beer, ice cream, grease and other pollutants, sodium hydroxide or potassium bicarbonate solution shall be used.
6. Hydrochloric acid, nitric acid and other dilute solutions are used for ink, cement and other pollutants.
7. Paint, paint and other pollutants use special cleaning agent.
8. Rust can be ground into powder with 3-4 vitamin C tablets, sprinkled on the surface of floor tiles, and then washed several times with water.
9. All kinds of glue can be removed with banana water. Pure banana water is a colorless, transparent and volatile liquid, which is flammable and mainly used as a solvent and diluent for spray painting.
3, Daily protection method of ceramic tile
1. Anti cracking: do not use metal sharp tools, glass ceramics, iron nails and other hard articles to knock or rub the ground in daily use. Do not drag weight articles back and forth on the ground to avoid scratching the glaze and affecting the appearance.
2. Anti scratch: if there is a slight scratch treatment, apply toothpaste around the scratch, wipe it repeatedly with a soft and clean dry cloth, and then apply a small amount of floor wax, after drying, polish it with a clean cloth to achieve a bright and new effect. If the damage is serious, it shall be replaced in time or repaired by professionals.
3. Damp proof: it is better to open the doors and windows immediately after cleaning to let the air circulate and blow dry the moisture on the ceramic tile wall. In the humid summer weather, dry cloth can be used to wipe again, and then turn on the air conditioning dehumidification.
4. Antifouling: for general stains, it can be treated with soft dry cloth. In case of stains that must be cleaned with water, it is recommended to use a cloth that is soaked and dried until no water dripping.
5. Anti mold: the gap between the tiles can be cleaned with decontamination cream from time to time, and then brush a layer of waterproof agent on the gap with a brush to prevent the growth of mold.
4, Key area tile maintenance
1. Bathroom
(1) Clean the soap scale: for the accumulation of soap scale on the bathroom wall, you can wash it with warm water first, make the soap scale partially dissolved, and then use a brush to gently wipe it. In addition, sulfuric acid or hydrochloric acid solution can also be used to drop it on the brick surface, and wipe it after standing for several minutes.
(2) Defense against soap dirt: the stain left by soap can be avoided. After daily bath, timely wipe out the soap foam on the wall; in addition, the ceramic tile at the corner of the bathroom can be coated with a layer of antifouling agent, which can effectively avoid soap dirt.
2. Behind the faucet
(1) Clean the rust: the ceramic tile wall behind the water pipe and faucet in the house is easy to have a layer of rust, which can be removed by washing with 2% oxalic acid solution, and then wiped with clean water. You can also use 3-4 vitamin C tablets milled into powder, sprinkled on the surface of ceramic tiles, and then wash with water several times, can also remove rust stains.
(2) Rust prevention: for the ceramic tile behind the water pipe easy to rust, antirust agent or professional rust remover can be used to prevent rust and remove rust; in addition, the ceramic tile easy to rust can also be partially polished, coated, greased, antirust oil and other methods to prevent rust.
Ceramic tile grinding and renovation method
1. Ceramic tile grinding and Renovation - deep cleaning
(1) When using, there are many factors that cause the tiles not to be well maintained. There is dirt in the gap position of the tiles. It is necessary to clean the stains penetrating into the interior of the tiles first, so that it can return to the original new brick appearance, and it is better to return to the previous gloss.
(2) Then prepare to do the anti pollution repair treatment. The old floor tile renovation is to use the weighted refurbishing machine to polish and polish. First, polish the stains on the surface of the floor tile, and then use the method of rough grinding and fine grinding to make the luster of the brick surface appear again.
2. Ceramic tile grinding and Renovation - professional cleaning
(1) Using the method of ceramic tile grinding and renovation, the cost is relatively good, and it may not be restored. If possible, first clean the internal dirt with the deep cleaner of the floor tile and ceramic tile to let it leak out the original appearance.
(2) If it's not good, you can ask the professional staff to do another maintenance by the way. Look at its recovery. If the effect is good, you can keep it. If you have to, try not to polish and renovate the tiles. It's easy to damage the surface of the tiles.
