Oil stains on the surface of kitchen tiles:
In the kitchen that has been used for a year, we need to thoroughly clean it. Ceramic tile is the area of serious oil pollution in the kitchen. No matter the wall or the ground, it will be attached with a layer of yellow and thick oil pollution. Moreover, this kind of oil pollution is very difficult to clean, and it will affect the beauty of the kitchen. Although we often clean the tiles in our daily life, they are not so thorough. So long as you know some tips for cleaning the kitchen tiles, you should be able to easily remove these oil stains.
Use toilet paper to apply "Mask" to tiles.
Put toilet paper or paper towel on the tile, spray detergent on it for a while, just like a female facial mask, the detergent will not drip everywhere, and the grease stain will all stick up. As long as the toilet paper is torn off, and then wiped with clean cloth dipped in water for 1-2 times, the tiles will be completely new. As for the tiles with heavy oil pollution, the toilet paper or paper towel can be pasted on the tiles for one night, or cotton cloth can be used to replace the toilet paper. After the oil stain is fully absorbed by the paper towel, wipe it with a wet cloth. This method can also be used for the ventilation fan inside the range hood.
Clean tile with toothbrush:
In fact, sticking to simple oil control and cleaning every day can reduce workload and work difficulty. Because, such oil pollution area is relatively small, and the degree is shallow, easier to clean. In the daily small range of oil stains, you can skillfully use the old toothbrush for cleaning, which is not only clean, but also labor-saving. In addition, the old toothbrush can also be used for the hard cleaning places such as tile seams, because the teeth of the toothbrush are relatively small, which can penetrate into the gaps for deep cleaning.
Shovel wire ball cleaning:
It is useless to remove the oil on the ceramic tile for a long time. If the oil on the ceramic tile or the gap is really thick, shovel it with a shovel first, or clean it with a steel wire ball first. After thinning it, you can clean it with a detergent containing acid or soluble ingredients.
Candle clean tile joints:
Apply the candle gently to the joint of the ceramic tile, first vertically, so as to evenly smear the candle at the joint; then horizontally, so as to make the thickness of the ceramic tile and the thickness of the candle equal. Why should we paint the candle? Because the surface of the candle is very smooth, even if it is stained with oil, it can be cleaned with a light wipe. In the future, when cleaning the oil stain on the tile and tile joint at the back of the stove, just use the general detergent to scrub normally.
Daily cleaning methods of kitchen and toilet tiles:
1. In our daily life, we will make some simple stains on the tiles, such as ordinary dust and mud, which can only be cleaned with soap and detergent. Add some ammonia water and turpentine with soap to mix liquid, can make ceramic tile more glossy.
2. The structure of the glaze layer of the glazed tiles is tight, and the dirt will not penetrate into the tiles. For some common stains, you can clean them with cotton cloth and detergent. Do not let the water penetrate into the cracks of the tiles, which may cause new pollution or peeling off of the tiles. Concave and convex tiles can be brushed with a brush.
3. Different from other tiles, polished tiles have fine pores on their surface, which will absorb some dust and bacteria when exposed for a long time, and look old and lose luster. It's better to wax regularly once a quarter.
4. If there are scratches on the brick surface that are difficult to clean, spray a little detergent, and wipe it gently after applying toothpaste, and then dry it in a minute or two.
5. The gap between the brick and the brick is the most difficult to clean. The tile cleaner can be used for maintenance from time to time. A layer of waterproof agent can be applied to the gap to prevent mold growth.
6. The glue on the tile should not be removed. Banana water can be used. Pure banana water has a strong smell of banana, which is liquid, colorless, transparent, volatile and flammable. It is mainly used as a solvent and diluent for painting. The effect of cleaning the glue on the tile is also very good.
7. It's difficult to clean the paint, paint and other pollutants. This kind of pollution needs to be removed with chemical solvents, such as Tianna water
