Tile Leveling System Diy Tiles Leveler Spacers

Features:

1.With our tile leveling system, you can quickly adjust and maintain the flatness and distance between tiles.

2.Use the ceramic tile adhesive to prevent the displacement of cement or ceramic tile and affect the beauty of ceramic tile.

3.Easy to operate, very easy to use.

4.It greatly improves the speed of laying bricks and reduces the difficulty of laying bricks,

5.Tile leveling device (adjust the level between tile and tile)

6.At the end of the work, kick out with feet or use rubber mallet to knock out along the gap direction.

7.Cap can also be reused after disassembly.

Advantages:

DYTS-5 tile leveling system is a unique two-piece spacing system for the installation of large tiles, marble and stone

The DYTS-5 system is designed for quick installation, ensuring that there is no lipstick on the finished floor surface. This time-saving system adjusts the height of the tiles and evenly maintains their edges throughout the curing process.

DyTS-5 was developed to reduce costly errors in high-end devices. Where narrow grouting is needed, it is a perfect system to be used with large format rectification porcelain, marble, stone or tiles of different thickness. The system is fast and simple, and is the most cost-effective installation method in the market.

Product Description

Product Display

1.0 mm cross card reusable wall tile leveling system

How To Use

1. Place the base at the bottom of tiles and make reservation seam processing

2. Rotate cap to tile level and wait for tile to solidify

3. Tap the cap along the direction of the tile to separate the base

Company Profile

We have two factories which occupy a total area of more than 18,000 square meters, and a total of 102 sets of injection molding machines with the heaviest up to 15,000KN(1500tons). We set up different kinds of assembling rooms according to different injection molding products, such as the medical instruments assembling room, the electronics assembling room, the baby-car assembling room, mountaineering bag accessories assembling room, and tile spacers automatic packaging workshop. Our team has around 320 hard -working workers, including 37 managers, 24 engineers, and 16 quality inspectors. We deal with design and manufacture of plastic precision molds，construction products, power tools, auto parts, baby strollers, mountaineering bags, plastic buckets and folding crates and so on, specializing in using PC(polycarbonate), PA(nylon),PMMA(acrylic), POM(polyformaldehyde), PPO,PBT,PC/ABS, TPU plastic raw material to adjust production process appropriately so that products can achieve the best performance.

Performance and Packaging

We provide professional customization technology to meet the needs of each customer. After the quality inspection, classification and packaging of the parts, we will contact the transport vehicle. According to our commitment to automation and protection, we will show you the samples after they come out. We will mass produce them only after you are satisfied. We will also try to reduce cartons and freight.

Our Material

We can use a full range of plastic materials. When we cooperate with leading customers in their respective industries, we choose different materials for different products, but all materials are subject to strict quality control, safe and assured. Wabash employees rarely use injection molding materials. Dy plastics has a large number of plastic components in our area and participated in the development and test of a variety of new plastic materials.

We have a large warehouse that can store 50-200 tons of plastic materials. We are engaged in the design and manufacture of plastic precision molds, construction products, electric tools, auto parts, baby carriages, mountaineering bags and precision plastic parts. We are specialized in using PC (polycarbonate), PA (nylon), PMMA (acrylic acid), POM (polyformaldehyde), PPO, PBT, PC / ABS to adjust the process of TPU plastic materials appropriately, so that your products can achieve the expected best effect Fruit.

FAQ:

1.Q:What kind of product can you make?

A: Plastic injection molding and mass production of plastic parts.

2.Q:What kind of information do you need to quote?

A: 1) sample photos with dimensions or 2D / 3D design

2) Product materials

3) quantity

4) Runner type, cold or hot

5) Die steel type, P20, 718, 2738, H13, S136, 2316, etc.

3.Q: I don't have 3D drawings. How should I start a new project?

A: You can send us some samples or tell me your ideas. We will help to finish 3D drawing design.

4.Q: How long does it take to complete the mold making?

A: It usually takes a month to complete the mold.