Features:

1.Preferred material, durable, excellent plastic material

2.Personalized design, reusable, novel design, reusable

3.Easy and convenient, labor-saving and efficient, designed carefully, and used more labor-saving

4.The product is firm and effective

5.Effectively keep the brick surface flat, the gap between the tiles is even, and fix the tiles

Advantages:

1.Time saving: easy to operate, easy to use, easy to use for novice, no technical guidance

2.Labor saving: easy to use, ergonomic, convenient to carry

3.Money saving: recycling, more money saving, suitable for laying tiles at home

DYTS-7 dimensions

How To Use

1. When laying the first brick, the seam shall be more than 2mm, not too thin

2. Insert the T-shaped needle smoothly along the gap of the ceramic tile, and then rotate it 90 degrees. When the T-shaped needle is tightly stuck at the bottom of the two bricks, screw down the adjusting cover to make the two bricks in the same horizontal plane

3. Before the cement is not completely set, loosen the adjusting cover in the opposite direction, and then turn the T-shaped needle 90 degrees to turn the I-shaped needle parallel to the tile joint, and take out the leveler

DYTS-7

Matters Needing Attention

The gap of ceramic tile must be more than 2mm (it can be used with cross card)

Always clean the cement or other sundries around the steel needle

After tile leveling, be sure to take out the leveler between the cement half dry and not dry

Product Packaging Display

Our product packaging generally includes 50 caps, 50 clips and one plier

1.5mm and 2.0mm bag packing

About Us

We have two factories, covering an area of more than 18000 square meters. There are 102 injection molding machines in total, the heaviest of which is 150000kn (1500 tons). We set up different assembly rooms according to different injection products, such as medical equipment assembly room, electronic product assembly room, baby carriage assembly room, mountaineering package accessories assembly room, tile gasket automatic packaging workshop, etc. Our team has 320 hard-working employees, including 37 managers, 24 engineers and 16 quality inspectors. We are mainly engaged in the design and manufacture of plastic precision molds, construction products, electric tools, auto parts, baby carriages, mountaineering bags, plastic buckets, folding boxes, etc. we are specialized in the use of PC (polycarbonate), PA (nylon), PMMA (acrylic acid), POM (polyformaldehyde), PPO, PBT, PC / ABS, and properly adjust the production process of TPU plastic raw materials to achieve the best performance of the products.

We can provide professional customized services for your products, and make you satisfied has always been our biggest pursuit, so if you have better opinions or ideas about our products, please share them with us, and we will accept your guidance with open mind.

详情页1_01

Manufacturing Industry

Our facility has 118 presses, fully automated, with a complete production plan (24 hours a week, 7 days) throughout the year to maximize efficiency. Each press is microprocessor controlled with capacities ranging from fractions to 107 ounces and clamping forces ranging from 46 to 720 tons. At every step of the manufacturing process, the product tolerance, color and appearance shall be inspected for quality control.

CANGKU CANGKU2