Characteristic:

1. Greatly improve the flatness of tiles after laying

2. The gap between the tiles shall be uniform

3. Improve the construction efficiency and prevent the movement of tiles during installation

4. Reduce the construction difficulty, so that novices can also lay flat and beautiful tiles

Product Composition

PP/HDPE clip: new material environmental protection, non-toxic, toughness, high convenience surface, smooth without burr, not easy to break, the base and wedge are used together, and the clip can not reused.

2. Labor saving tightening pliers: new tightening and fixation are not loose, metal material, handle is PP/HDPE material, easy to clamp, labor-saving

3. Universal clamping wedge:

High toughness PP/HDPE material, harder and more durable, clear and tidy tooth lines, improve tile flatness, use wedge with clip, wedge can be used repeatedly.

clip bent

Product Description

1.0mm long-leg clip

How To Use

1. The base is placed under the ceramic tile, and one brick is equipped with four sets of products

2. Use level ruler and rubber hammer to knock flat

3. Clamp with pliers

4. It can be broken after 24 hours, the base is disposable, and the wedge can be reused

how to use

Packaging

We are proud to provide products in time to meet the needs of each customer. Quality control is carried out through classification, weighing and sealing. According to our automation and protection obligations, our servo motors are provided with registration and packaging.

BAOZHUANG

About us

We have two factories covering a total area of more than 18000 square meters and a total 102 set of injection molding machines with the heaviest up to 15000KN(1500tons). We set up different kinds of assembling rooms according to different injection molding products, such as the medical instruments assembling room, the electronics assembling room, the baby-car assembling room, mountaineering bag accessories assembling room, and tile spacers automatic packaging workshop. Our team has around 320 hard -working workers, including 37 managers, 24 engineers, and 16 quality inspectors. We deal with design and manufacture of plastic precision molds，construction products, power tools, auto parts, baby strollers, mountaineering bags, plastic buckets and folding crates and so on, specializing in using PC(polycarbonate), PA(nylon),PMMA(acrylic), POM(polyformaldehyde), PPO,PBT,PC/ABS, TPU plastic raw material to adjust production process appropriately so that products can achieve the best performance.

详情页1_01