First type
FAQ: scale and rust are hard to clean
Kitchen, bathroom water pipe often use water, over time, in the back of the water pipe, or often in contact with the water place, tile prone to yellow rust or scale, difficult to clean.
Solution: scrub with vitamin C
The rust on the ceramic tile can be removed by washing with 2% oxalic acid solution, and then wiped with clean water. In addition, you can use 3-4 vitamin C tablets to grind into powder, sprinkle it on the surface of ceramic tile, and then wash it with water for several times to remove rust stains.
Maintenance Tips: rust prevention starts from protection
Coup 1: for the back tiles of the water pipes easy to rust, you can use antirust agent or professional rust remover to prevent rust and remove rust.
Coup 2: Polish, film, grease and antirust oil the tiles easy to rust to prevent rust.
Acid cleaner: oil and dirt proof
second form
FAQ: oil pollution is difficult to clean
The kitchen is the place with the most serious oil pollution. It is inevitable that there is oil pollution on the ceramic tiles in the kitchen, especially in the crevices, which are thick and hard to remove.
Solution: help with acid cleaner
For the oil stains left on the ceramic tiles for a long time, it is ineffective to use the product of oil removal alone. If the oil stains on the ceramic tiles or the cracks are really thick, use a shovel first, or use a steel wire ball to clean them first. After thinning, you can use a detergent containing acid or soluble ingredients to clean them.
Tips for maintenance: material selection and installation is the key
Coup 1: in the kitchen and other places with serious oil pollution, the use of vitrified bricks has good oil control effect and good visual effect.
Coup 2: paste anti oil stickers on the tiles with heavy oil pollution, and use a beautiful seaming agent at the gap of the tiles, which is beautiful and resistant to oil pollution.
Anti soap and scale brush for bathroom
The third type
FAQ: soap dirt left by bathroom tiles
It is easy to leave a small amount of soap in the place where soap is often used in the bathroom, which will lead to soap dirt left by the ceramic tiles in the bathroom, especially the long-term unclean dirt, which is more difficult to remove.
Solution: brush with hydrochloric acid
For the soap dirt on the ceramic tile, you can first wash it with warm water to make the soap dirt partially dissolved, and then use a brush to gently wipe it. In addition, sulfuric acid or hydrochloric acid solution can be used. Drop it on the brick surface, leave it for a few minutes, and then wipe it. Pay attention to protect your hands.
Maintenance Tips: cleaning is the most important
Tip 1: the stains left by soap can be avoided, only need to pay attention to daily cleaning, to avoid soap stains left on tiles for a long time.
Tip 2: in the corner of the bathroom tile can be coated with a layer of antifouling agent, can better avoid soap dirt.
