Nine Plastic Injection Molding Technologies And Their Characteristics

Nov 01, 2018

Leave a message

Gas assisted injection molding(GAIM)

Forming principle:

Gas assisted molding (GAIM) refers to a new injection molding technology, in which high pressure inert gas is injected when the plastic is properly filled into the mold cavity (90% ~ 99%), and the melt plastic is driven by gas to continue to fill the mold cavity, replacing the plastic pressure maintaining process with gas pressure maintaining.

Characteristic:

Reduce residual stress and warpage;

Eliminate the depression trace;

Reduce the clamping force;

Reduce the length of flow channel;

Material saving;

Shorten production cycle time;

Extend the service life of die;

Reduce the mechanical loss of injection molding machine;

It is applied to the finished products with large thickness variation.

GAIM can be used to produce tubular and rod products, plate products and complex products with uneven thickness.

 

Water assisted injection molding (WAIM)

Forming principle:

Water assisted injection molding (WAIM) is a kind of technology developed on the basis of GAIM. Its principle and process are similar to GAIM. WAIM uses water instead of GAIM's N2 as a medium for emptying, penetrating melt and transferring pressure.

Features: compared with GAIM, WAIM has many advantages

The heat conductivity and heat capacity of water are much larger than that of N2, so the cooling time of products is shorter and the molding cycle can be shortened;

Water is cheaper than N2 and can be recycled;

The water is incompressible, so it is not easy to have finger effect, and the wall thickness of the product is even;

Gas is easy to penetrate or dissolve into the melt, which makes the inner wall of the product rough, and bubbles are generated in the inner wall, while water is not easy to penetrate or dissolve into the melt, so the product with smooth inner wall can be made.

Precision injection molding

Forming principle:

Precision injection molding is a kind of injection technology that can mold products with high internal quality, dimensional accuracy and surface quality. The dimensional accuracy of the plastic products produced by this method can reach below 0.01mm, usually between 0.01 and 0.001mm.

Characteristic:

The dimensional accuracy of the parts is high, and the tolerance range is small, that is to say, the dimensional deviation of the precision plastic parts with high precision will be within 0.03mm, and some of them will even be small to micron level, and the detection tools depend on the projector.

 

High repeat accuracy of products

The main performance is that the weight deviation of parts is small, and the weight deviation is usually less than 0.7%.

The material of the mould is good, the rigidity is sufficient, the dimensional accuracy, the finish of the cavity and the positioning accuracy between the formworks are high

Using precision injection equipment

 

Adopt precision injection molding process

Accurately control mold temperature, molding cycle, workpiece weight and molding production process.

Applicable precision injection molding materials PPS, PPA, LCP, PC, PMMA, PA, POM, PBT, engineering materials with glass fiber or carbon fiber, etc.

Precision injection molding is widely used in the fields of computer, mobile phone, CD and other micro electronic products, which have higher requirements on the internal quality uniformity, external dimension accuracy and surface quality of injection molding products.

Micro injection molding

 

Forming principle:

Due to the small size of the plastic part, the micro fluctuation of the process parameters has a significant impact on the dimensional accuracy of the product, so the control accuracy of the measurement, temperature, pressure and other process parameters is very high. The measurement accuracy shall be accurate to milligram, the temperature control accuracy of barrel and nozzle shall be ± 0.5 ℃, and the mold temperature control accuracy shall be ± 0.2 ℃.

 

Characteristic:

Simple forming process

Stable quality of plastic parts

High production efficiency

Low manufacturing cost

Easy to realize batch and automatic production

Micro plastic parts produced by micro injection molding method are widely used in micro pumps, valves, micro optical devices, microbial medical devices and microelectronic products.

 

Microcellular Injection Molding

Forming principle:

The microcellular injection molding machine has one more gas injection system than the ordinary injection molding machine. The foaming agent is injected into the plastic melt through the gas injection system and forms a homogeneous solution with the melt under high pressure. After the polymer melt with dissolved gas is injected into the mold, the gas escapes from the melt rapidly due to the sudden drop of pressure, forming the bubble core, growing up and forming the micropore, and the microporous plastic is obtained after the molding.

 

Characteristic:

With thermoplastic materials as the matrix, the middle layer of the products is densely covered with micro pores from ten to tens of microns.

Micro foam injection molding technology breaks through many limitations of traditional injection molding. On the basis of basic guarantee of product performance, it can significantly reduce the weight and molding cycle, greatly reduce the clamping force of the machine, and has the characteristics of small internal stress and warpage, high straightness, no shrinkage, stable size, large molding window, etc.

 

Microcellular Injection molding, especially in the production of high-precision and expensive products, has unique advantages compared with conventional injection molding, and has become an important direction of injection technology development in recent years.

Vibration injection molding

Forming principle:

Vibration injection is a kind of injection technology, which can control the condensed structure of polymer and improve the mechanical properties of products by superposing vibration field in the process of melt injection.

Characteristic:

When the vibration field is introduced into the injection molding process, the impact strength and tensile strength of the products increase, and the molding shrinkage decreases. The screw of the electromagnetic dynamic injection molding machine can pulsate axially under the action of the electromagnetic winding, so that the melt pressure in the barrel and the mold cavity changes periodically. This pressure fluctuation can homogenize the melt temperature and structure, reduce the viscosity and elasticity of the melt.

 

Injection molding for interior decoration

Forming principle:

It is a kind of technology that can realize the integration of decorative pattern and plastic after printing decorative pattern and functional pattern on the film by high-precision printing machine, sending foil into the special molding mold by high-precision foil feeding device for precise positioning, and transferring the pattern on the foil film to the surface of plastic products through the high temperature and high pressure of injection plastic raw materials.

Characteristic:

The surface of the finished product can be solid color, metal appearance or wood grain effect, and graphic symbols can be printed. Finished product list

 

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!