Tile leveling system is very useful. If the floor of the living room, bathroom, kitchen etc. need to be tiled, the ground should be leveled first (with an error of less than 5mm), and then paved with tile glue.
First, we use tile cross spacer to determine tile joint width and mark it when you buy it (for example, if you leave a seam of 1.5mm, you can only buy a clip of this size). Usually there are five sizes(1mm/1.5mm/2mm/2.5mm/3mm).
After use, we knock off the leveler with hammer or kick off it, the clip will be broken inside and cannot be reused. The red wedges and pliers can be reused. (proposed scale: clip : wedge=3:1 or 5:1)
By the way, different tile thicknesses need to use different tile leveling system. This clip and wedge leveling system is for 3-12mm and 6-15mm thickness tile. If your tile is very big or small, there are also different kinds of tile levelers for you to choose.
 |  |
