If you want a car to look good, you need to take care of all the details. In this way, the handle belt is also one of the most important accessories! Although it's very easy for every technician to wrap the strap, it's a skill accumulated over a long period of time. In fact, every technician's way of wrapping the strap is not the same. We are not technicians. How can we make the strap beautiful and firm? Let's learn the following steps.
First of all, you should choose a roll of strap that you like and has texture. On the one hand, it should feel comfortable and the appearance should be pleasing to the eye. In fact, the glue behind the strap is also very knowledgeable. First, let's know what kinds of tape and glue behind the strap are.
A variety of handlebars
1. The handle of imitation leather is solid.
2. The foam grip is soft and shock-absorbing.
Back tape style
1. No gum, can be reused.
2. Double sided adhesive. After a long time, there will be residual adhesive.
3. The smart gel thickened back glue group has many advantages, such as repeated adjustment, no residual glue and easy cleaning, which can also improve the comfort of long-distance riding to a certain extent.
Two common entanglement methods
1. Positive winding method: winding from the bottom (tail plug) to the top (handle close to the center point). Additional glue should be pasted at the end. The stacking direction of winding tape is clockwise, so it is not easy to turn up.
2. Reverse wrapping method: wrap from the top (near the center of the handle) to the bottom (tail plug). The tail plug will be used to fix the end. If the tape itself has back glue, it is recommended not to stick extra adhesive tape. The tape is stacked in reverse direction, so it is easy to turn up.
Let's start the tape!
This article demonstrates the "positive winding method". First, start winding from the end of the bent handle. Each handle belt will have a pattern, and try to have the spacing alignment, so that the overall feeling will be greatly improved. In the process, one hand is wound and the other hand is applied with pressure to make the strap fixed and not sliding disorderly, and then the strap is wound upward.
Start winding from the tail plug of the lower handle
Avoid sliding, one hand winding, the other hand fixed, lines as far as possible alignment can enhance the overall sense
Middle key 8 characters
Come to the middle is the key, first from the inside to the outside around the corner
Then go inside from the outside
Pull down horizontally
It's important here! Press on a circle of the strap and wind it from the lower end to the upper handle in a shape similar to 8, which is more firm
Remember to tighten and keep winding up
Continue winding on the upper handle end
Finally, follow the direction of the tap around the past, at this time will enter the final stage
The end of winding
Then enter the final action, in order to finish beautiful, the end of the belt will be cut off, and then fixed with black tape.
Cut off the bevel of the end of the belt, and make sure that the bevel is close to the tap side
This action is conducive to the end of the belt more neatly
Wrap the end of the triangle around the upper handle
Then the black insulating tape is pasted and fixed
Finally, use the brand tape, which is more beautiful
Finally, the tail plug cover is filled up
