After using the tiles for a long time, it is inevitable that some stains and scars will be found. If you want to remove them, you will feel helpless. After reading the article here, you can try it.
Cut by sharp objects, trampled by high-heeled shoes... All kinds of scratches left on the floor tiles make the tiles become big and colorful, which makes it uncomfortable to watch. Is there any way to fix it?
For the slight scratches on the surface of the ceramic tile that do not damage the structure of the ceramic tile, the toothpaste can be evenly applied around the scratches, repeatedly wiped with a dry cloth, and then applied with some wax oil, wiped with a clean cloth
Paint or nail polish can dip a little bit of paint that is the same color as the tile, or wipe it gently with nail polish. Remember to clean the brick before you wipe it.
Waxing slight scratches can be used waxing method, play a desalination effect. Oxalic acid with a soft cloth stained with oxalic acid, hard wipe can repair ceramic tile scratches. Sandpaper grinding or steel wire ball wiping with sandpaper grinding or steel wire ball wiping need to be very careful, otherwise it is easy to damage the tiles, causing wider scratches.
The water mill can also be used for grinding and polishing the deep scratches, but the grinding and polishing should be very careful, otherwise the pit or brick surface will be more damaged.
At present, there are also professional scratch cleaning and repairing agents on the market. Dip a little repairing agent into the scratch gap with a small brush. After drying, repeat painting twice every half an hour until there is reflection from the side, so that the scratch stains will disappear without trace. After treatment, the floor tiles are almost invisible, and the bright surface is not affected.
Ceramic tile stain removal bright clean ceramic tile once meet all kinds of stains, the degree of beauty will be greatly reduced. Year end cleaning, how to deal with all kinds of stubborn stains?
Remove rust stains - the tiles near the vitamin C faucet are most prone to rust stains, which can be removed cleverly with vitamin C: grind 3-4 vitamin tablets into powder, sprinkle them on the surface of the tiles with rust stains, and then wash them with water for several times. It can also be treated with water solution of vitamin C, and then wiped with clean water.
Remove oil stain - Peel toilet paper can be used to treat the oil stain of ceramic tile. You can use peel or grapefruit peel to wipe, or you can use toilet paper to remove oil: cover the toilet paper on the ceramic tile, and then spray detergent on the paper towel. After a period of time, tear off the toilet paper, at this time, the oil has all floated on the toilet paper. Finally, clean with clean water for several times, and the tiles will be as bright as new.
Remove drink stains - bleach tea, coffee, juice and other drinks will easily leave stains once they drop on the tiles. At this time, sodium hypochlorite diluent (bleaching agent) can be used to soak the brick surface for 20-30 minutes and then wipe it with a cloth.
Remove food oil stains - alkaline cleaner can remove all kinds of animal and vegetable oil stains and mechanical oil stains, such as ice cream, edible oil, etc. Common alkaline cleaners include specially strengthened oil cleaners, strong waxing water, etc.
Removal of soap scale - brush hydrochloric acid soap, soap and calcium and magnesium ions in water will form insoluble soap scale. Mild soap scale can be washed with hot water and then scrubbed with a brush. If the peel effect is not good, you can use sulfuric acid or hydrochloric acid solution, drop it on the brick surface, stand for a few minutes, and then wipe it. Do not let your hands directly contact the acid solution when cleaning.
Lime stamp, cement stain - when decorating with acid cleaner, leave lime stamp and cement stain on the ceramic tile carelessly. You can use acid cleaner for cleaning, which can not only break the stain, but also don't worry about hurting the ceramic tile.
Cleaning of brick joints
● dip a small amount of decontamination paste into the toothbrush, brush gently to remove the dirt in the ceramic tile gap, wash with clean water at the same time, and then apply a waterproof agent on the gap with a brush. In this way, it can not only prevent the penetration of water, but also prevent the growth of mold.
● wet the tile cleaner with sponge or rag, wipe the contaminated surface, and then immediately wash it with clean water in large quantity, so as not to leave the tile cleaner on the surface white.
● dissolve with caustic soda heating water and wipe with dry cloth in the direction of joint
● candle caulking. Apply the candle to the joint of the ceramic tile vertically and horizontally to make the thickness of the candle level with the surface of the ceramic tile. With the protection of wax layer, even if there is oil stain on it, it can be cleaned with a light wipe.
