Waterproof/Fireproof EPS Architectural Precast Lightweight Cement Composite Panel

Our company has a professional R&D team, sophisticated processing equipment, and a complete set of testing procedures to ensure product quality, increase market share, and consolidate our position in the Cleaning Bucket, 2.5L Plastic Round Bucket, 5L Plastic Round Bucekt industry. They are going to help you get comprehensive acknowledge about our products and make a satisfied negotiation. The team of our company with the use of cutting-edge technologies delivers impeccable quality products supremely adored and appreciated by our customers worldwide.

DYTS-1

Product description

The clips and wedges hold the tiles perfectly level. Once the adhesive is set the wedges can be removed and the clips are designed to be easily snapped leaving the tiles ready for the grout. This process can also speed up the installation process. Therefore our DYTS-1 tile leveling System enable tiles to installed easily, quickly and perfectly level. DYTS-1 tile leveling System Clips is a one use item because the base of the clip is left underneath the tile and the top is snapped off. We have different sizes of tile clips using for 1.0mm/1.5mm/2.0mm/2.5mm/3.0mm tile joint widths and they are designed for tile thickness of between 3mm and12mm or 6mm and 15mm. The red wedges can be reused for a lot of times.

Number or use (clips / ㎡)

Clip : Wedge = 3:1 or 5:1

Table detailing the number of leveling Wedges and Base Clips required per square meter

DYTS-2

Product description

The clip/strap is 1.5mm for tile joint widths and they are designed for tile thickness of between 3mm and12mm or 25mm and 32mm. The yellow wedges can be reused for a lot of times.

Number or use (Straps / ㎡)

For example, 50x50cm tile to affixed 20m2 area floor, and you need 300pc straps and 100pcs wedges

Strap : Wedge = 3:1 or 5:1

DYTS-3

Product description

This system of interlocking leveling caps and caps/straps ensures that your floor will be level from one tile to the next, and it also prevents tile for settling and warping as your thin set cures. It is designed to create a virtual lippage free tile installation when used on floors or walls. The System interlocks the tiles, virtually creating a single flat slab surface while the setting material is curing. The interlocking design of the system reduces and in most cases eliminates settling from shrinkage, as well as minimizing the possibility of warping.

Technical Characteristics
(1) Ideal for laying tile that are over 12" ( 300x300mm )or that require the use of an adhesive mix.
(2) Allows for the installation of marble and granite tiles.
(3) For tiles between 1/8"to 5/8" ( 3mm and 16mm ).
(4) Thick with a grout joint of at least 1/36" ( 0.7mm )

DYTS-4

Product description

Its system of reusable strips and caps is the only system on the market able to ensure consistent pressure on the ceramic tile. Our DYTS-4 tile leveling system there by ensure against lippage during tile installations. Professionals who choose the tile leveling system can reduce the installation time for tiles, whilst improving levels of finishing of their work and, therefore, the satisfaction of their customers. The tile leveling systems ensure a minimum 1/16 in. grout joint, both in ceramic floor or wall tile installation work and slabs of natural stone, such as marble or granite.

Technical Characteristics
(1) Ideal for the installation of 30 x 30 cm ceramic tile with back-buttering.
(2) To level the granite and marble tiles.

(3) Can be used to tile from 3 to 20 mm thick tiles.

(4) The strap allows minimum joints 0.75mm.

DYTS-5

Product description

Using a simple base clip and a ring/cap that threads down onto the base, you can achieve perfect leveling from one tile surface to another with minimal effort and NO TOOLS!

·  Simply "Hold the Base, Twist in Place”

· Can Be Used Directly at the Intersection on Tiles

· Very Cost Efficient

· NO TOOLS REQUIRED!

· Set Large Format Tile and Stone with Confidence

· Easy To Use

· Rings/Caps are Reusable

· Rings/Caps can be used with tiles between 1/8" - 1/2" thick

· Tile Joint Width=1.0mm(1/25")

1. Please contact me BY sales@yzdingyue.com if you want some samples. We can offer free samples based on small quantity.

2. OEM Acceptable! We can provide various kinds of packaging ways according to your requirement, as printing bags, buckets, carton boxes and etc.

3. Your Logo printing is OK!

4. We accept any new molds designs. We have our own mold workshop. If you have any good ideas, just feel free to contact me, we can make molds according to your any requirements.

FAQ

1. What the MOQ? 

Normally our MOQ is 1000bags .Small quantity is also acceptable.

2. What's the delivery time? 

In one week (based on MOQ)

3. How about the shiping?

We ship the cargo by sea or air as clients' required. Or we can provide door to door service if you need.

4. What's the payment? 

TT, WESTERN UNION, L/C, Trade Assurance on Alibaba

[[ContDescription]]