High Viscosity Cellulose HPMC Used in Tile Adhesive

Our company strives to become a leading enterprise in the Tilers Bucket Washboy Complete With Toolkit, rolling knee pads harbor freight, Hand Pouring Soft Plastic Mold industry based on the tenet of winning the market with high-quality products and winning customers with a first-class after-sales service system. It is also convenient to visit our website. Our products have high quality, attractive price, sufficient supply capacity and perfect service. The company is committed to building an sales ecological chain service industry cluster for global consumer groups.

Product Description

The ceramic tile itself will expand to a certain extent. In addition, the edge of the ceramic tile is not 100% flat, so it is inevitable to leave a seam. Even the seamless brick on the market at present is only with a smaller gap, but it cannot be absolutely seamless

The use of the card is also relatively simple. It can be placed at the junction of four tiles, inserted into the insert, clamped with pliers, and then knocked off with a hammer after the tiles are pasted. It is specially used to handle the junction between two tiles, and it can align four tiles at one angle at a time.

Features

1.Tile leveling system material is very common, processing technology is mature, low cost, low price

2.By using tile leveling system, the working efficiency can be greatly increased by more than one time, and the working time can be greatly shortened

3.Suitable for various thickness and types of plates, such as vitrified brick, ceramic tile, etc

4.It almost eliminates the unevenness caused by the upwarping of the tiles during the laying process

Product Details

How To Use

1. Insert the base under the tile,

2. Insert the insert into the gap of the base and fasten it

3. Use level ruler and rubber hammer to knock flat

4. Clamp with pliers

5. One tile with 4 sets of products

6. Knock it off after a period of time

7. Wedge can be reused

Matters Needing Attention

1. Before use, the surface shall be clean without scratch, color difference, crack, pollution, edge missing, angle dropping, etc.

2. The joint between the floor tile edge and the wall corner shall be suitable, and the skirting line shall cover the gap.

3. When checking the flatness, 2m level ruler shall be used for inspection, and the error shall not exceed 3mm, and the height difference of adjacent bricks shall not exceed 2mm.

4. During operation, the floor must be firmly pasted, the hollowing must be controlled within 5%, and the single hollowing area shall not exceed 10%, so as to avoid affecting the beauty and firmness of the tiles.

5. The width of the floor tile joint shall be 2mm, not more than 3mm. In addition, the pointing shall be even and straight.

6. The horizontal error shall not exceed 4mm.

About Us

Injection Mold Engineering

Our team includes some of the most experienced and knowledgeable engineers in the thermoplastic injection molding industry. We are committed to establish a good partnership with customers throughout the design process to ensure that we deliver satisfactory finished products. We believe that the best products come from good communication between customers and Dy team. Please feel free to give us your idea, we will provide you with the most intimate service.

The project management process starts with effective communication. Our engineers will take time to understand the customer needs and then help guide the customer on the path that provides the best opportunity to meet the goals. Our engineers understand the need to be competitive, to be responsive, to be on time, and to help develop a product that is effective as intended. We have a staff of engineers that supports the project from the initial concept stage, through tooling, through process development and on to production launch.

DY Plastics engineers have many types of CAD software at their disposal. Our goal is to support all customers—we will never require a customer to conform to our tools. We support CATIA, Pro Engineer, AutoCAD, IGES, STEP, and many other types of CAD software files. If it’s not listed, don’t worry. Give us a call and we will work to accommodate your needs.

Our experience is wide ranging from a concentration in program management and tool design to production automation and process development.We fully utilize tools such as scientific injection molding. A properly decoupled molding process allows for wider processing windows and more consistent parts for our customers. This means tighter production control and better quality product.

If you are interested in fewer design modifications, shorter design time, lower production costs, and higher quality products, then don’t hesitate to contact DY Plastics. We measure results in customer satisfaction.

Packing

Packing: Paper bags, plastic bags and paper boxes

Our packaging has been strictly controlled by quality control, which is firm and reliable to ensure that the products are delivered to you in good condition.

FAQ:

Q1. How can I get one sample of any product for checking the quality?

A: 1.Please let us know your exact specs details. We can provide you a sample according to your specification.
    2. You can send us your samples. We can give you a counter sample according to your sample.

Q2. How can I get a quote for my product?
A: 1.Please offer us your exact specs details. We can offer you one sample and price accordingly.
    2. You can send us a sample and we can give you a counter sample and price according to your samples.
    3. If you don't know any specification, you can give us the pictures of the product, and the usage, we can give you an estimated price according to our experience. But the exact price must be offered after we check your original sample.

Q3. I don't know the material or any other material information, how can i order this from you.
A: It's the best way if you can send us a sample, so we can give you a counter sample for checking the quality, also we will quote for you to find the cost. After confirming all this, you can contact our sales for an order.

Q4. I am a small wholesaler, do you accept small order?

A: It's no problem if you are a small wholesaler. We would like to grow up with you together.

[[ContDescription]]