Floor Tile Leveling Clips

T lock leveling system is the most popular tile leveling kit. It can be used as wall or floor tile leveling system by rotating.

Products Description

Ceramic tile spacer and wedge leveling clips plastic auto level system wall

1. Our Tile leveling System Support Online Wholesale.

2. If your quantity more than 100bags, please contact us by E-mail,we will provide you quotation include shipment cost by ocean or others.
3. OEM Acceptable! we can provide various kinds of packaging way according to your requirement, PP bag, bucket or carton, your Logo print OK!
4. We accept any new molds design ,if you have any good idea ,just feel free to contact me ,we will do molds for you according to your requirement.

REUSABLE

Removing It Before The Cement Or Tile Glue Has Completely Dried Up Usually No More Than 6 Hours

Clean And Dry Storage For Reuse

Continuously optimize products and insist on quality first: do not make small models, do not do return materials, and do not make cheap galvanized steel bars that are easy to rust, bend, and break.

Advantage

1. The leveling is easy, the paving is fast, which is conducive to the positioning of the tiles, the gap is uniform, the movement is prevented, and the efficiency is improved.

2, adjustable wrench, labor-saving, natural and convenient operation.

3. The leveler is reused, safe and environmentally friendly.

4. High-quality stainless steel needle, one-piece stamping, not easy to break.

High-quality PP plastic + super-hard manganese steel nickel-plated steel needle

High-quality super-hard round steel needle, not easy to scratch the tile. The manganese steel material is nickel-plated, the hardness is not easy to break, and it is more durable!

Using new PP raw materials, good toughness, impact resistance, strong corrosion resistance! Export quality! Casting reputation!

Steps for usage

Efficient, uniform, fast and convenient

1.Lay the first tile leaving a seam≥2M, close to the neighbor.

2.Insert the T-shaped needle along the tile gap.

3.Then rotate the -shaped needle at 9o to clamp the needle at the bottom of the two tiles .

4 Hold the T needle with one hand and adjust with the other Tighten the adjustment cover clockwise with a wrench to The two brick faces are on the same level.

5. About 5-6 hours after leveling the cement is not Before drying press and hold the adjustment cover, Turn the T-shaped hand clockwise to remove it .

Packing：

50pcs+1 plier/bag 25bags/54*38*32cm G.W.=20KG

We offer a full range of plastic molding capabilities to efficiently mass-produce partsspecializing in injection molding.

Ding Yue Plastics is capable of injection molding a wide variety of sizes and shapes in a near endless variety of plastic and rubber types and colors with precision and expertise. If you want to reduce the expense of your existing plastic part, or have plans for a new custom plastic part, our plastic molding capabilities provide competitive prices, exceptional quality control, and convenient on-time shipping.

Our team has around 320 hard -working workers, including 37 managers, 24 engineers, and 16 quality inspectors. We deal with design and manufacture of plastic precision molds,construction products, power tools, auto parts, baby strollers, mountaineering bags,plastic buckets and folding crates and so on, specializing in using PC(polycarbonate), PA(nylon), PMMA(acrylic),POM(polyformaldehyde), PPO,PBT,PC/ABS, TPU plastic raw material to adjust production process appropriately so that products canachieve the best performance

Plastic Injection Molding

We will assist you with new product development and introduction by concurrently working with your staff of engineers during the design phase of your project.

Our design and engineering group streamlines the product development process.

We help you design parts using plastic injection molding technology which can replace sheet metal, castings, stampings and machined materials saving you cost and weight.

Our team can work with you to redesign or modify existing parts to reduce your production costs by analyzing material selection, weight reduction, the production process and packaging. Our engineering department has the experience to design custom secondary fixtures from CNC to final assembly and has the ability to reverse engineer any part or product.

Materials List

We have a big warehouse which could be able to storage 50~200ton plastic materials. We deal with design and manufacture of plastic precision molds, construction products, power tools, auto parts, baby strollers as well as mountaineering bags, precision plastic parts, specializing in abs injection, polyethylene injection molding, polystyrene injection molding. nylon molding, ppe for injection moulding and other thermoplastic injection.

Shipping: by air, sea, or express

Sample lead time: 5~7 days

Delivery time: about 25~30 days after order details and production confirmed.

FAQ:

Q: Do you have all kinds of tile leveling system?
A: Yes. please contact us if you have the type you want.

Q: What is the tile thickness that the leveling system is suitable for?
A: This type is suitable for 5-16 mm tile thickness.
If your tiles are big or small, I would recommend the most suitable one for you.

Q: Can you customize colors?
A: Yes. If your quantity is large, we can customize the color you want.

Q: Are you manufacturer.
A:Yes, we have been in producing all kinds of bike accessories over 10 years.

5, What is the lead time?
Sample time 4-6days ,mass production 15-30days for order 1000pcs.

6: Can you give me a discount?
A: Since we are factory, our policy is that bigger order quantity, the lower quotation will be offered. So, we will give you a discount as your order quantity.

7: Do you accept OEM or ODM orders?
A: Yes, Our R&D team will offer one stop service for you from original idea to finished product.

8: How is your design team?
A: We have our own design teams to exploit new series of items at fixed period with our research and development team.