New Type Construction Tools Reusable Tile Leveling System Kit

Features:

1.Wear-resistant, Reusable.

2.Easy to use for DIY operation.                             

3.Keep the tile balance on the same horizontal position.

4.Professional and practical design, beautiful appearance, convenient to carry

5.Leveling tools can be used to complete construction quickly and efficiently.

6.The operation is very simple and convenient, and it is easier to remove after operation.

7.You can quickly achieve a smooth level surface using the new system

8.Solve the leveling and alignment problems during tile laying tiles

Advantages:

1. Simple operation, convenient use, easy to use for novice, no technical guidance

2. It is easy, convenient, ergonomic and labor-saving. More convenient to carry

3. Recycling. More money saving, suitable for novices

4. It plays a good role in adjusting the flatness of ceramic tiles

How To Use

1. Pave the first brick with a gap of more than 2mm and close to the second brick

2. Insert the T-shaped needle along the gap, and then rotate it 90 degrees. Clamp the T-shaped needle under the two tiles and tighten it for adjustment

3. After tightening with spanner, wait for 3 or 4 hours to take it out. Please take it out in time and don't forget

4. Before the cement is dry, loosen the adjusting cover in reverse direction, turn it 90 degrees, and then take it out

Packaging

Processing industry

Our factory has 118 presses, which are fully automatic. We have a complete production plan for most of the year.) To maximize efficiency, each press is controlled and self-adjusting by a microprocessor, with a capacity ranging from elevation from 80 to 900 tons. At every stage of the production process, check the quality, tolerance, color and appearance of the product.

Design For Injection Molding

We develop and process plastic parts. Once we are ready, people will come to us at all stages of the concept and design process. DY plastic & Electronic has more than 20 years of experience in mold design.

Applied visual design

1.Product engineering

2.Current prototype

3.Structure improvement

4.Resin selection

5.Accounts and accounts

FAQ:

1.Q: how long can I get a reply to the inquiry?

A: All inquiries, except the rest in China, will be answered within two hours. 2. You can call us at any time.

2.Q: how often can I get a sample?

A: In general, samples can be sent within 7 days after the mold is made.

3.Q: what is the acceptable file format for my product?

A: One. We can take different formats, IGS, step, STP, JPG, PDF, DWG, DXF, etc. if you are not ready to scan CAD files, we can accept manual scanning.

4.Q:If I don't have drawing, how can I get the sample?

A: if you don't have a drawing, you can send us a sample. Let's scan it so that we can confirm the two-dimensional and three-dimensional drawings first.