Here are some considerations for laying Matting for underfloor heating:
Preparation before installation
Ground condition inspection
The ground must be flat, dry and clean. If the ground is obviously uneven, it needs to be leveled first. For example, use cement mortar to fill the potholes in the ground, and ensure that the height difference does not exceed 3-5 mm, otherwise it will affect the laying effect and heat dissipation uniformity of the matting for underfloor heating.
The moisture content of the ground should meet the requirements, and it is generally recommended not to exceed 18%. Excessive moisture content may cause damage to the matting for underfloor heating or deformation of the floor. A professional moisture content tester can be used for testing before laying.
Material inspection
Carefully check whether the matting for underfloor heating is damaged, scratched, or exposed wires. For matting for underfloor heating with a thickness of 5mm, a width of 1m, and an adapted cable diameter of 3.8-6mm, ensure that its size meets the requirements of the installation space, and check whether the cable channel is unobstructed to ensure the smooth laying of subsequent cables.
Check whether the color of the matting for underfloor heating is correct. If there is a request for customized color, confirm that it is consistent with the order. At the same time, check whether the accessories such as the matching temperature control device are complete and intact.
Tool preparation
Prepare the tools required for installation, such as scissors, tape measure, utility knife, tape, etc. Scissors are used to cut matting for underfloor heating, tape measure is used to accurately measure the size, utility knife can finely trim the edge of matting for underfloor heating, and tape is used to fix the heating pad and connect the gap.
During the laying process
Planning and layout
According to the shape and area of the room, reasonably plan the laying direction and splicing method of matting for underfloor heating. Generally speaking, matting for underfloor heating should be spread throughout the room as much as possible to reduce the edge area where heat is lost. If the room is irregular in shape, the heating pad needs to be cut and spliced. Be careful to avoid too large splicing seams in the center of the room, and try to arrange the splicing position in the corner or under the furniture placement.
Laying operation
Start laying the matting for underfloor heating from one corner of the room, and slowly unfold it, while ensuring that the back of the matting for underfloor heating fits tightly against the ground to avoid hollowing. During the laying process, tape can be used to fix the adjacent edges of the matting for underfloor heating, and the connection gap should be as tight as possible to prevent heat loss. If the matting for underfloor heating needs to be cut, it should be cut with a sharp tool, and the edges after cutting should be neat to avoid burrs that affect subsequent use.
When laying the cable, strictly follow the requirements of the product manual. Carefully place the cable into the cable channel of the heating mat, ensuring that the cable diameter (3.8 - 6mm) fits the channel, and the cable cannot be excessively bent or squeezed to avoid damaging the insulation layer of the cable and causing safety hazards.
During the laying process, pay attention to keeping the red regular color (or customized color) of the matting for underfloor heating facing up to avoid dirt or damage.
Avoid damage
During the laying process, installers should avoid wearing sharp shoes while walking on the matting for underfloor heating to prevent puncture of the matting for underfloor heating. At the same time, other sharp tools or objects should be prevented from falling and damaging the matting for underfloor heating.
Yangzhou Dingyue Plastic Electronics Co., Ltd. has 10 years of experience in foreign trade. We have rich production experience and produce various types of tile tools. In our store you can see any product you are interested in. Come and visit and contact us!
FAQ
Q: Do you have all kinds of tile space?
A: Yes. please contact us if you have the type you want.
Q: What is the tile space MOQ?
A: The normal MOQ is 3000 bags
Q: Can you customize colors?
A: Yes. If your quantity is large, we can customize the color you want.
Q: Are you a manufacturer?
A: Yes. We have ourselves factory, our products are designed and developed by ourselves.
Q: Can I take samples before bulk order?
A: Yes, we are always happy to send you samples of our products. Simply let us know what your requirements are and the delivery address.
Q: Can you do our own packaging?
A: Yes, you just provide the package design and we will produce what you want. We also have the professional designer can help you do the packaging design.
Q: When can I get the price?
A: Usually we quote within 8 hours after we get your inquiry.
Q: What is your terms of delivery?
A: We accept EXW, FOB, DDP, CIF, etc. You can choose the one which is the most convenient or cost effective for you.
Hot Tags: matting for underfloor heating, China, manufacturers, suppliers, factory, customized, wholesale, buy, 1 8 Hard Tile Cpacer, 2 0mm Tile Spacer, 4mm Long Leg Tile Spacer, tiling knee pad pad work, leveling spacers for tiling, 1 0L Square Clear Plastic Bucket
