Low Injection Pressure Overmolding

Low injection pressure overmolding process is a packaging overmolding process that uses very low pressure (0.15-4MPa) to inject hot melt materials into the mold and quickly cure them

Low pressure injection molding process

It only takes three steps

Step 1: Insert components	Step 2: Injection molding	Step 3: Test

	Used in consumer electronics High frequency cable USB Cable Fixed glue coating at welding place and flat wire to avoid high temperature and high pressure damage. And guarantee the high frequency transmission rate. Examples: HDMI, Type-C, Mini SAS				Circuit board PCB Low injection pressure and good adhesion, PCB/FPC has a good fixing and sealing protection.
	Battery Battery Low-voltage molding reduces the failure rate, improves the energy density of batteries and reduces the assembly positions of auxiliary materials.				Sensor Applicable to all kinds of sensors, such as temperature, humidity, air, distance, smart battery and other sensors.
	Lighting LED Lighting Strong adhesion, short curing time and waterproof grade of IP67 ~ IP68.				Automotive Electronics Sensing switch, reversing radar, seat heating/seat belt sensing, tire pressure monitoring, rearview mirror, door handle, charging gun, anti-theft coil, exhaust emission purification, filter (air filter).

Custom Steps

01. Description Requirements

According to the needs of your own enterprise, compile a detailed demand specification, which must be detailed

02. Communication and negotiation

Communicate according to needs, which solutions are most suitable, and negotiate budget, construction period and so on.

03. Production scheme

According to the negotiation results of both parties, the preliminary design scheme should be carried out to meet the needs of users as much as possible.

04. Sample View

After the user determines the scheme, make samples according to the drawings, and wait for the final confirmation of the user.

About us

Parts and Equipment

Always the right choice for your individual requirements.

We know how diverse the requirements of our customers and the products they produce are. At DingYue, we see ourselves as a total solution provider. We support our customers in their challenges. Our injection moulding service stand for efficiency, quality and reliability.

Foreign Customer Reviews

We have been serving overseas markets for 10 years and have received good reviews from our customers. We are still young in China, but we do not compromise on quality.

FAQ

1. HOW SOON CAN I GET REPLY AFTER SEND INQUIRY?

A: All inquiries will be replied within two hours except off time in China.

2. HOW SOON CAN I GET ONE SAMPLE?

A: Generally samples can be sent out within 7davs after the mold has been finished

3. How Long Is The Lead-Time For Mold?

A: It all depends on the mold's size and complexity. Normally, the lead time is 25—35days.

If the Molds are very simple and not big size, we can work out within 15 days."

4. Before Shipment, How To Make Sure The Products Quality?

A: If you don't come to our factory and also don't have the third party for inspection, we will be as your inspection worker,we will supply you a video for production process detail include process report, products size,structure and surface detail, packing detail and so on, and will provide the inspection report to you.

5 Q: Which Kind Of Product Can You Do?

A: Plastic injection molding and mass production for plastic parts

6 Q: What Is Your Terms Of Delivery?

A: EXW, FOB, CIF, etc.