Molding Workshop
We have a professional molding workshop for making and maintaining different molds.
Usually the mold material is P20, 718H, NAK80, H13, 2738, NAK80, S136, SKD61 and we have processing craft like milling, griding, drilling, engraving and so on in this workshop. Also there are CNC, EDM, ArgieCharmilles, Milling Machine, 3D CMM, Projector, HG, Injection Machine in the mold workshop. We have a team of 40 people including 20 engineers and 20 operators and for designing and building your molds. We will minimize the overall cost of your project and offer one best solution for your any mold idea!
Plastic injection molding machine
We have around 100 injection molding machines to produce from a range of small to big plastic products which the biggest machine is 1500ton.
To produce parts by injection material into the mold is one of the most commonly used manufacturing process for the fabrication of plastic components which are widely used in various commercial, industrial and laboratory applications.
An injection molding machine, a mold and plastic resin raw material are required in the injection molding process. Plastic resin raw material melted by heater, then mixed and injected into the mold where it cools and solidifies into the completed part.
Divided into three categories
(1) the gate of mold, the runner and gate on the parting line, together with the product in the mold stripping, the simplest design, easy processing, low cost, so more people using gate system operation.
(2) nozzle mold: the runner and gate is not the parting line, generally directly on the product, so to design a set of runner/gate parting line, design is relatively complex, processing more difficult, often depending on the product requirements to choose fine nozzle system.
(3) the hot runner mold: this kind of mold is approximately the same structure and fine runners/gates, the biggest difference is that flow into one or more of the temperature of heat flow but and heat pumping mouth, no cold feeding molding, runner and gate directly on the product, so the port don't need mold release, also known as no runner system, this system can save raw materials, applicable to the raw material is more expensive, high requirement of products, design and processing difficulties, mold cost is higher.
Mold Processing
DY Mold Processing
Step 1 | Quoting | Needed 3D drawing or sample |
Step 2 | Mold Design | Send mold design for confirmation |
Step 3 | Mold Making | 50% as the initial payment for starting to make the molds |
Step 4 | Test Run | After finishing the mold making, we will test it and make some samples. |
Step 5 | Sample Confirmation | Send free samples to clients for confirmation and need 50% balance payment after getting the approval from the clients |
Step 6 | Mold Modification | If there needs to be slightly changed on the mold, we will modify the mold and send the samples for confirmation again. |
Step 7 | Mass Production | 50% as the initial payment for starting to make the mass production based on the mold. |
Capabilities
Let DY Plastics bring your project design into reality. Our exceptional team can guide you through the idea-to-production cycle, providing the expertise necessary to successfully launch your program. Our flexible capabilities in the production of high quality plastic injection molded products and assemblies allows DY Plastics to find the right solution for almost every project.
From our full spectrum of injection molding processes, including our specialties in multi-shot / two-shot molding and gas assist, to our complete line of state-of-the-art molding equipment and assembly technologies, our capabilities in the plastics industry are robust enough to meet any request you have.
Our team has around 320 hard -working workers, including 37 managers, 24 engineers, and 16 quality inspectors. We deal with design and manufacture of plastic precision molds, construction products, power tools, auto parts, baby strollers, mountaineering bags, plastic buckets and folding crates and so on, specializing in using PC(polycarbonate), PA(nylon), PMMA(acrylic), POM(polyformaldehyde), PPO, PBT, PC/ABS, TPU plastic raw material to adjust production process appropriately so that products can achieve the best performance.
The tile leveling system you are interested in is one of the advantage and main products from our company.
We have been OEM for a lot of Brands.With a lot of expericence in production process on it , we have strong confidence to offer you the best quality and price with the most trusted service!
FAQ
1.Q: How soon can I get reply after send inquiry?
A: 1.All inquiries will be replied within two hours except off time in China. 2. You can call us at any time.
2.Q: What information should I give you for getting a quote?
A: Please offer us 2d and 3d drawings and tell us your special requirements such as material, tolerance, surface treatments and the amount you need or we can offer some advices to you according to your requirements.
3.Q: If I don't have drawing, how can I get one sample ?
A: If you don't have any drawings, you can send us your sample, we will scan it and make 2D and 3D drawing first, then make samples for you.
4.Q: What's your MOQ (minimum order quantity)
A: We don't have MOQ if you have mold making, you are welcome to send us trial order to test our quality and service.
Hot Tags: OEM ODM high precision auto mold plastic parts, China, manufacturers, suppliers, factory, customized, wholesale, buy, Plastic Mold Engineering, Hard Plastic Mold, OEM Service Plastic Injection Molding Products, Plastic Injection Molding Applications, High Precision Plastic Auto Parts, Plastic 1 16 Vacuum Mold
