Mountain Bicycle Mudguard

Bike Accessories Durable Bicycle Mudguard Front Rear Mudguard Cycling Road Mountain Bike Bicycle Fender

Characteristics

This fender installed on the front fork shoulder, can be well protected before the inner tube is at least the fork sand hit, preventing scratches in the tube. Mud and rain can be effectively stopped and it can prevent mud, rain, goggles, guarantee clear vision and improve the odds. Mounted on the rear fork to withstand the sand and the rear wheel. Sand, gravel, and friction frame. It can also effectively block the fly splash debris after reaching the liner and turn point.

Product detail

It has one seatpost and one replaceable gasket and one adjustable screw for installing the bike.

1. The buckle of the rear mud guard should be stuck on the seat shaft of the bicycle which may be a little tight!

2. Two different thickness of the gasket, depending on the thickness of your car seat shaft. Choose a different gasket!

3. If the screw of the front fender is too long, you can replace it with the screw of the rear fender tile!

Product descriptions

MASS_APP4_182_EN

How to install the mudguards

1. Attach the cushion ring to the bicycle seat tube

2. Fasten the end of the fender bracket to the saddle tube. And adjust the up and down position of the fender

3. Prepare a Phillips screwdriver, adjust the upper and lower positions of the fender, and tighten the mounting screws.

4. Adjust the angle of the fender, and finally tighten the adjustment knob.

Packaging and delivery

A full range of sea and air logistics system to provide you with the most convenient logistics experience, rapid response to save you time.

Our Services

1. Product QC: Quality be controlled from the beginning; each product be checked and cleaned before packing into carton; before shipping, clients could send QC or third party for inspection.

2. Professional Staff: Well-trained and professional staff and engineers will provide to our customers timely reply.

3. Market: Our products have been shipped around the world, Poland, England, Mexico, Chile etc.

4. Reasonable price and discount: We always offer reasonable and flexiable price to all customers, and special discount to our distributors.

5. OEM service: OEM, buyer label service provided; any drawing or sample to develop new products.

6. After sale service: If you have any question about products, please feel free to communicate with us, we will deal with it with serious and responsible attitude.

Our strength

Yangzhou Dingyue Plastic Electronics Co., Ltd. is a strong company, mainly engaged in injection molding, a wide range of products, good quality, reasonable price, fashionable design. Our products have been widely recognized and trusted by users to meet the changing economic and social needs. We welcome new and old customers from all walks of life to visit and contact us to establish future business relations and achieve a win-win situation!

FAQ